How to Create Bootable Flash Disk to Install Windows Seven Without Any Software.

Create Bootable Flash Disk to Install Windows Seven. This guide will show you how to create a bootable flash disk to install Windows Seven without using any additional software. With this flash disk you can directly install Windows seven on your computer or laptop. So, you don't need any cd/dvd rom drive to run windows installer DVD.

Now, follow this guide to create a bootable flash disk to install windows seven.

1. Make sure you have minimum 4 GB Flash Disk.
2. Make sure you have computer run on windows seven (7) any version.
3. Turn on your computer.
4. Now, plug your Flash Disk into computer USB port.
5. Then, click start and type cmd and Enter.
6. On the command prompt windows, type diskpart and enter.
7. Type list disk then enter.
8. On this step you must be careful to select your USB Flash Disk, If you have only one USB Flash Disk connected to your computer, you can select Disk1 as your USB Flash Disk.
9. Now type clean then press Enter.
10. Then type Create Partition Prinary and press Enter.
11. Now type Select Partition 1 then press Enter.
12. Type Active then press Enter.
13. Now type format fs=fat32 then press Enter.
14. Then type assign and press Enter.
15. Then type Exit and press Enter.
16. On this step your USB flash Disk was became bootable USB flash disk.
17. At the final step. Now copy all content of Windows Seven DVD, and paste to the USB Flash Disk.
18. Once copying file finished. You can eject your USB flash disk.
19. Now, go to the target computer, set thus computer to boot from USB Flash Disk by entering computer BIOS. And you ready to install fresh windows seven on a new computer.

Finish.